Wiesemann & Theis GmbH, Wuppertal
www.WuT.de
Products for Ethernet, TCP/IP, serial and printer ports
 

Com-Server Highspeed Isolated

Network by direct connection: 3 insulated serial highspeed ports to the network

high resulution product foto

Com-Server Highspeed Isolated, 58662

Product properties

  • ++ Monen käyttäjän yhteys samanaikaisesti
  • Sarjamuotoisen datan lähetys useampaan verkko-osoitteeseen
  • ++ Wake-on-LAN

  • Com-Server voi käynnistää tarvittaessa tietokoneen
  • ++ Sarjadatan tehokkaampi pakkaus TCP-pakettiin ja siten nopeampi tiedonsiirto

  • Virta käyttäen Power-over-Ethernettiä tai ulkopuolisen virtalähteen avulla 24-48VDC
  • Nopea asennus W&T:n EasyStartilla!
  • Voidaan määritellä Web-selaimella, Telnetillä, SNMP:llä tai Controlsocketilla
  • RS232, RS422 tai RS485 sarjaporttivaihtoehdot
  • Sarjaportin nopeus 230.4 kBit/s saakka
  • Verkkoportti 10/100BaseT automaattisella tunnistuksella
  • avoin tiedonsiirto
    • ... Windowsin virtuaalinen COM portti
    • ... Box-to-Box
    • ... TCP server socket
    • ... OPC serveri
The highly compact Com-Server Highspeed Isolated provides everything you need for directly connecting up to 3 serial interfaces to the computer network in industrial environments. All three interfaces are optically separated with a dielectric strength of 1 kV, both mutually and with respect to the supply voltage. In this way, breaks in operation due to potential differences, and problems occurring for example in the case of remote lightning strikes or when powerful rotary current motors start running, are counteracted from the very beginning.

All protocols are included (see box or applications after the product datasheets). The serial interfaces of the Com-Server can be switched between the standards RS232, RS422 and RS485. The serial and the network parameters are set via Telnet, ARP / RARP, SNMP or also via an Internet browser and web-based management.

COM Port Redirector
The W&T COM Port Redirector for
Windows 9x/NT/2000/2003/XP/ Vista / 7/ 2008 :lle ( 32-bit ja 64 bit ) also gives serially operating Windows programs the ability to communicate over the network. Virtual COM ports are installed on the system which behave like standard COM ports with respect to the applications. Communication with the terminal device is now however over the network and a Com-Server.

Application description COM Port Redirector
Download COM Port Redirector for Windows 9x/ME
Download COM Port Redirector for Windows NT/2000/2003/XP/ Vista / 7/ 2008 :lle ( 32-bit ja 64 bit )


Protocols:

    Serial port protocols:
    XON/XOFF, hardware handshake
    SLIP, other options on request
     
    Protocols for direct network connection:
TCP/IP:   UDP/TCP sockets, FTP, Telnet for Client and Server
    Auxiliary protocols:
    ARP, RARP, DHCP/BOOTP, PING, RIP, SNMP,
    HTTP
    Inventory keeping, group management
     
    Protocols for paired Com-Server operation:
    (connect serial devices in pairs on the network)
    Box-to-box mode TCP/IP


Technical data:

Serial port:   3 x RS232, RS422, RS485 interface
    DB9 connector, configurable
Baud rate:   50 to 230.400 baud
Data format:   7, 8 data bits, 1, 2 stop bits
    No, Even, Odd parity
Flow control:   Hardware handshake or
    XON/XOFF protocol
Network:   10/100BT autosensing
Galvanic isolation:   Network connection: min. 1 500 volts
    Serial ports: 1 kV mutually and with respect to the supply
Ambient storage temperature:   -40..+70°C
Housing:   Plastic small housing, 105x75x45mm
Weight:   approximately 400 g
     
Supply voltage:   DC: 12V (-10%) .. 48V (+10%)
    AC: 9Veff (-10%) .. 24Veff (+10%)
Current consumption:   typ. 130 mA @24 V DC
Ambient operating temperature:   non-cascaded: 0..+60°C
    cascaded: 0..+50°C
Delivery:   1x Com-Server Highspeed Isolated, 3 ports
   
  virtalähde tilattava erikseen

Detailed information:

on the Com-Server Highspeed Isolated: FAQs Applications Manual  Tools